A cigar lounge has to keep smoke in the lounge and out of the house. We engineer the air first, then finish the room in leather, wood and stone for homes in Camp Hill, Mechanicsburg and the townships around them.
Across the West Shore, a lot of evenings end at home. People commute across the river to Harrisburg, then want a room of their own when the day is done. A cigar lounge can be that room. It can live in a finished basement in Lower Allen, a converted den in a Camp Hill colonial or a lower level in a newer Silver Spring home. The setting changes. The engineering does not.
Older homes need the most care. Many Camp Hill and Mechanicsburg houses have forced-air systems with shared returns, and some still run gas or oil appliances in the basement. Smoke follows ductwork and pressure, so a lounge in that house has to be sealed off and kept at negative pressure without starving the furnace or water heater of air. We check those appliances before we design anything.
Newer homes in Hampden Township and Silver Spring tend to be tighter, which helps keep smoke contained but makes make-up air more important. An exhaust fan pulling air from a tight house will find a way to replace it, and you do not want that path to be a flue. We size exhaust and make-up air together so the lounge clears quickly and the rest of the house stays balanced.
The exhaust is sized to the room's volume and how many people smoke at once. It holds the lounge at negative pressure so smoke moves out, not into the hallway. Air cleaning and filtration work alongside it to keep the room clear between exchanges.
Exhaust pulls air out of the house, and that air has to come back from somewhere. Without planned make-up air, it can come down a furnace or water heater flue. We check fuel-burning appliances and design make-up air so the house is never depressurized.
Smoke rides ductwork. We give the lounge its own HVAC zone so it does not share returns with the rest of the house. A solid-core door with gaskets, sealed penetrations and tight construction keep the smell where it belongs.
A cabinet or walk-in humidor in Spanish cedar with active humidity control holds cigars around 65 to 70 percent relative humidity. Leather, hardwood and stone resist odor. We skip carpet and fabric drapes, which hold smoke for years.
Lounge costs depend most on the air system and the humidor you choose. Your fixed, itemized quote shows each part before we start.
$40,000–$80,000
An existing room sealed and fitted with dedicated smoke exhaust, make-up air, filtration and a humidor cabinet.
$80,000–$175,000
Its own HVAC zone, a walk-in or built-in humidor, a bourbon wall or bar, and odor-resistant millwork and finishes.
$175,000–$300,000+
A larger lounge with a full bar, fireplace or media wall, coffered ceilings and custom paneling throughout.
These are typical industry ranges for finished projects in Pennsylvania, shown for planning only. They are not a quote. Your price depends on the size and condition of the space, the structural, electrical, plumbing and HVAC work it needs, the cabinetry and finish level you choose, and permit requirements. Ventilation and humidor choices drive much of the cost, along with paneling and millwork. Leather seating, furniture, décor and your cigar and spirits collection are not included unless they're listed in your quote. Every project gets a fixed, itemized quote after design.
We build cigar lounges in Hampden Township, Camp Hill, Lower Allen, Upper Allen, Mechanicsburg and Silver Spring. Ventilation, electrical and HVAC work usually needs inspection, and for most projects we pull the permits and schedule inspections with your township so you do not have to chase them.
Yes, with planning. Older homes often share one duct system across every room and may have gas or oil appliances in the basement. We separate the lounge onto its own zone, check those appliances for back-drafting risk and design make-up air to match the exhaust. The room gets built around the house's mechanical systems, not on top of them.
Not if the room is built right. Smoke escapes a lounge through shared ductwork, gaps around doors and positive pressure. We fix all three with a dedicated HVAC zone, a gasketed solid-core door and exhaust that keeps the lounge at negative pressure. That is the core of the design, and we do it before anything decorative.
Often, but not always. Basements are easy to isolate, and many Hampden Township and Silver Spring homes have plenty of room downstairs. In some older homes, a den or addition with an exterior wall is easier to vent. We look at exhaust routes, appliance locations and how you want to use the room before choosing the spot.
Only if your collection calls for it. A well-built cabinet humidor in Spanish cedar with active humidity control is plenty for many people. A walk-in suits a larger collection and becomes a feature of the room. Both hold cigars around 65 to 70 percent relative humidity. We size it to what you keep on hand.
Yes. Many lounges pair cigars with a bourbon wall or a small bar. We plan display shelving, lighting that shows off the bottles and, if you want one, a bar sink with proper drain and vent. Finishes stay odor-resistant throughout, so the bar side holds up as well as the seating side.
A design consult takes about an hour at your home. You'll leave with a clear answer on what fits, what it involves, and what it costs.
Consults by appointment, weekdays and Saturday mornings
